Installation method of gabion net
Publish:
02 Aug,2024
I believe everyone is familiar with the application of gabion nets in our daily life, so do you know how to install gabion nets
I believe everyone is familiar with the application of gabion nets in our daily life, so do you know how to install gabion nets?
1. Place the staggered seams of the plastic-coated gabion net in place to prevent longitudinal penetrating seams.

2. Stand on the four sides of the plastic-coated gabion net and lock the adjacent edges with ties. When the tie wire is bundled, it wraps around two overlapping frames or twisted edges helically screwed between the frame wire and the cage to prevent galvanizing damage. The spacing does not exceed 50 mm.
3. The plastic-coated gabion net is installed under the complete bottom net, and is fixed on the bottom net along the lower frame of the newly-coated galvanized gabion net through the connecting line. The adjacent gabion nets on the same layer are connected to each other by connecting lines, so the plastic-coated gabion nets can be connected into one.
4. During the construction of the same-layer unit project, the end of the plastic-coated gabion net should be filled with pebbles. In order to prevent the deformation of plastic-coated gabion nets, the height difference between two adjacent gabion nets should not be greater than 35 cm.
5. Before installing the plastic-coated gabion net, the bank slope and the ground should be properly repaired, and the original shape of the bank slope should be maintained as much as possible, but there should be no obvious arches and depressions.
Keywords:
gabion company,gabion Wholesale Price,gabion products
Recommended